Replacement Draincock
Plastic Construction
This Corvette replacement radiator draincock has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for…
Stock Replacement 5/8" Hose 1/2" Pipe Thread Mostly Commonly Found Installed On Intake This is a common corroded part that can rust then snap off during a restoration of your classic Corvette. …
DeWitt Radiator's DIRECT FIT™ Corvette aluminum radiators are designed to install into the stock mounting and use the factory connections without any modifications or adapters. The term DIRECT FIT™ gets thrown around a lot today. Many…
DeWitt Radiator's DIRECT FIT™ Corvette aluminum radiators are designed to install into the stock mounting and use the factory connections without any modifications or adapters. The term DIRECT FIT™ gets thrown around a lot today. Many…
This Radiator Will Not Have A Radiator Cap. This Is A Sealed Radiator That Is Filled From The Expansion Tank. 100% All Aluminum Tanks, Fittings And Billet Fill Neck 40% Better Cooling And 50-75% Lighter Than Brass Radiators 3…
KEY FEATURES & BENEFITS: Patterned After Original Samples For Best Possible Fit Performance Grade Aluminum Cores Provide Maximum Cooling Per Square Inch Special Tube & Fin Design, Heli-Arc Welded, Vacuum Brazed, High Temp Epoxy…
Direct Fit With No Modifications
Use Factory Fans
48mm High Performance / Track Use Aluminum Radiator (For 700+ HP)
Includes The LS Steam Line Port
Fits Automatic &
Manual Transmission
1-Year Limited…
100% All Aluminum Tanks, Fittings And Billet Fill Neck 40% Better Cooling And 50-75% Lighter Than Brass Radiators 2 Rows of 5/8 inch Tubes (400-600+ Horsepower Cooling Capacity) High Efficiency 14-16 Louvered Fins Per Inch And 3/8"…
Driver Quality Reproduction
Improves Air Conditioning Performance
100% New And Are Designed For Bolt-Off/Bolt-On Installation
High Fiberglass Content In Shroud Offers Extra Strength & Rigidity While Improving…
3/4" Hose
1/2" Pipe Thread
Installed In Water Pump
+Except A.I.R.
This is a common corroded part that can rust then snap off during a restoration of your classic Corvette.
…
Direct Fit With No Modifications
Use Factory Fans
36mm High Performance / Street Aluminum Radiator (Stock Or Mild Modifications)
Includes 
The LS Steam Line Port
Includes 7 Plate Transmission Oil Cooler With OE…
Stock Replacement 2001E With Automatic Transmission 2002-04 With Automatic Transmission This stock replacement radiator is manufactured by GM or by one of its authorized suppliers as a factory replacement part. You will find the fit…
KEY FEATURES & BENEFITS: Patterned After Original Samples For Best Possible Fit Performance Grade Aluminum Cores Provide Maximum Cooling Per Square Inch Special Tube & Fin Design, Heli-Arc Welded, Vacuum Brazed, High Temp Epoxy…
Replacement Cap 17 Lb. Cap # RC-44 This Corvette replacement radiator cap has been manufactured to meet or exceed factory specifications and performance. You will find the fit and function will work perfectly for your Corvette. …
KEY FEATURES & BENEFITS: Patterned After Original Samples For Best Possible Fit Performance Grade Aluminum Cores Provide Maximum Cooling Per Square Inch Special Tube & Fin Design, Heli-Arc Welded, Vacuum Brazed, High Temp Epoxy…
Cools Better Than Stock Radiator Due To Greater Surface Capacity
Longer Lasting Than Stock Radiator
Bolt-In Installation
GM’s 1990-96 C4 radiator has a single row of cooling tubes and plastic end tanks that are epoxied in place…
KEY FEATURES & BENEFITS: Patterned After Original Samples For Best Possible Fit Performance Grade Aluminum Cores Provide Maximum Cooling Per Square Inch Special Tube & Fin Design, Heli-Arc Welded, Vacuum Brazed, High Temp Epoxy…
Universal Fit Engine Runs 20 - 40 Degrees Cooler Lighter Than Stock Radiators > High performance engines generate a lot of heat and require extra cooling. Whether you performance drive your Corvette or cruise it, keep its coolant…
KEY FEATURES & BENEFITS: Patterned After Original Samples For Best Possible Fit Performance Grade Aluminum Cores Provide Maximum Cooling Per Square Inch Special Tube & Fin Design, Heli-Arc Welded, Vacuum Brazed, High Temp Epoxy…
Fits 1997-2004 With Manual Transmission Only
High Performance Cooling System Upgrade
Has 
A 7-Plate Aluminum Engine Oil Cooler (EOC) On The Left Side
Eliminates Overheating Problems With Built Engines, Track Use, &
…
Great Upgrade For Your Cooling System Protects Aluminum Cooling System Parts Protect Cooling Systems From Galvanic Corrosion Designed To Replace The Drain Petcock In The Radiator 1/4" NPT Thread May Require Trimming To Fit Made In The…
My Account
