Fits 1963-1967 C2 Corvettes
Fits 1968-1982 C3 Corvettes
11 Piece Kit
Includes Everything for Complete Rebuild
Direct Replacements
Save the cost of a new control valve by rebuilding it yourself with our 1963-1982…
Unless your Corvette's cylinder shaft is bent or the shaft is missing chrome plating, this kit will rebuild your cylinder to like new.
This kit gives you all the needed parts to replace all the items at the end of the cylinder…
Heavy Duty Idler Arm
Heavy-Duty Construction Reduces Steeing Deflection To Increase Tire Life
Greasable Pivots For Extended Wear
Used When Using Wider Tires Than Standard Sizes
…
All the Parts you need to Rebuild your Power Steering
Hoses made in the USA
No Core Charge, Includes New Components
Power Steering Rebuild Kits include a New Power Steering Control Valve, New Cylinder, New Hose set and 1 Quart…
All The Pieces You Need To Reseal Your Own Pump
Corvette Power Steering Pump Kit Includes:
1 Shaft Seal
2 Mounting Stud Seals
1 Pump Body to Union Seal
1 Union "O"-Ring
1-Reservoir to Pump Body "O"-Ring
2-Pressure Plate…
This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler Specs:
Shaft Size: 3/4" coarse spline with flat at bolt head side
Spline Count: 25
Total OD: 3-1/4"
Bolt Size: 5/16"
Bolt…
Fits Late 1969-1982 Corvette
Remanufactured Steering Box
16:1 ratio
5 Year Manufacturer Warranty
These remanufactured steering boxes use the highest quality components - sector, recirculating ball worm and nut, bushing…
Quality Remanufactured
Throughly Cleaned & Reconditioned Like New
Each Component Is Carefully Inspected & Replaced If Not Within OEM Tolerances
All Seals & O-Rings Are Replaced With OE Equivalent Parts
Each Unit Is…
Left Hand Thread
Sold as Each
Changing the Tie Rod End in your Corvette will eliminate some of the shimmy you get in the front end of your Corvette while driving down the road. Our Tie Rod End is manufactured from heavy duty…
Great For Do-It-Yourselfer's
Allows You To Keep Original Casting
Includes Bearings & Races, Top Seal, Gasket, Recirculating Balls, Bushings, End Plug, Pitman Shaft Seal & Washers
For Use On Boxes WIth Or Without…
Ideal Replacement
Durable Construction
Quality Tested
This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.
…
Right Hand Thread
Sold as Each
Changing the Tie Rod End in your Corvette will eliminate some of the shimmy you get in the front end of your Corvette while driving down the road. Our Tie Rod End is manufactured from heavy…
Direct Fit Replacement Product
No Vehicle Modifications Required
Power steering pump bracket and mounting kit. Includes cradle, adjusting bracket, and attaching bolts.
…
Each slave cylinder is stamped with a Quality Control stamp that tells date and remanufacturer. This stamp provides information for quality control and warranty issues. Rebuilt slave cylinders are cut open and new…
OER® Authorized reproduction of the original steering coupling joint for various models. This coupler (rag joint) is required to connect the steering column to the steering box.
Coupler specifications:
Shaft size: 3/4" fine…
Quality Remanufactured
Throughly Cleaned & Reconditioned Like New
Each Component Is Carefully Inspected & Replaced If Not Within OEM Tolerances
All Seals & O-Rings Are Replaced With OE Equivalent Parts
Each Unit Is…
2 Required
Reproduction of Original
Rear Outer Suspension Camber Control
Broken or worn 1984-1991 Rear Toe Adjustment Link Tie Rod Ends will cause a loose feel in rear suspension, replacing these will allow for proper…
Can be used on any 1963-1968 Corvette without Power Steering when using a Base Horsepower Oil Pan
Steering damper shock kit, all excluding Power Steering, Special Hi-Performance, and Fuel Injected. Includes shock and mounting…