1984-1996 Half Shaft with Automatic or Manual Transmission
1982 Half Shaft with Automatic Transmission
1980-1981 Half Shaft with Manual Transmission
1963-1979 Half Shaft with Automatic or Manual Transmission
…
Premium Hi-Temp Red Grease
Superior Protection For Both Disc And Drum Applications
Formulated With Corrosion Inhibitors, Anti-Wear And Water Resistant Additives
16 oz Tub
Our Timken brand premium wheel bearing grease is a…
Greasable Units, Zerks Included
1997-1999 Half Shaft with Automatic or Manual Transmission
1982-1996 Drive Shaft with Automatic or Manual Transmission
1980-1981 Drive Shaft with Automatic Transmission
1980-1981 Drive Shaft with…
Non-Greasable
1997-1999 Half Shaft with Automatic or Manual Transmission
1982-1996 Drive Shaft with Automatic or Manual Transmission
1980-1981 Drive Shaft with Automatic Transmission
1980-1981 Drive Shaft with Manual…
Original GM Product
Bulk Packaged, so will Come in Separate Bag
Fastener Type:Bolt
Fastener Size:5/16-24 in. RH
Fastener Head Style:Hex head
Underhead Length (in):1.337 in.
Fastener Material:Steel
Fastener…
Stock Replacement
This stock replacement axle shaft french lock is manufactured by GM or by one of its authorized suppliers for use as a factory replacement part. You will find the fit, finish and function meets all GM…
55-67 Drive shaft front and rear
68-70 Excluding Turbo 400 trans front and rear
80-82 Automatic trans front and rear
80-81 4 Speed trans rear only
84-96 All
71-79 all Front and Rear Drive shaft use 582151
3 1/4" x 1 1/16" - 82.55mm x…
Set includes 2 driveshaft straps with 4 bolts
Overall strap length is 2 1/8 inches. Center-to-center of bolt holes is 1 9/16 inches. Bolt is 1/4 x 28 x 1/2DRIVESHAFTS STRAPS UNIVERSAL U-JOINTS UJOINTS…
DANA SPICER 5-460X
1310 to 1350 Series Combination Universal Joint. This is a very popular and handy u-joint when connecting mismatched driveline components.
Use this to connect 1310 series components to 1350…
1 1/16" (1.063") caps and is 3 7/32" (3.219") wide one direction and 1 1/16" (1.063") caps by 3 5/8" (3.622") wide the other
This is a very popular and handy u-joint when connecting mismatched driveline components. Use this…
Excellent Performance Upgrade
Can Prevent Catastrophic Underbody Damage Due To U-Joint Failure
Manufactured from heavy-gauge fabricated steel, these loops are given a durable, black glossy powdercoated finish and all hardware…
Replacement Kit
For U- Joint
Bolt Kit Use With P/N 1005707 Yoke
This Corvette replacement rear axle shaft u-bolt kit has been manufactured to meet or exceed factory specifications and performance. You will find the fit and…
Replace those old stretched out U-bolts. U-bolt set comes with:
2 U-bolts
4 lock washers
4 nuts
Fits a 1.062 ( 1 1/16") bearing cap diameter. 1 1/2" center to center of 5/16" thread dimemsion.
…
1-1/16" Cap
Greasable Units, Zerks Included
1980-1982 Drive Shaft with Automatic Transmission
1980-1982 Half Shaft with Automatic Transmission
1971-1979 Drive Shaft with Automatic or Manual Transmission
1968-1970 Drive Shaft…
Non-Greasable, 1-3/16" Cap
1984-1996 Half Shaft with Automatic or Manual Transmission
1980-1982 Half Shaft with Manual Transmission
1963-1979 Half Shaft with Automatic or Manual Transmission
All Spicer U-Joints are heat…
Non-Greasable, 1-3/16" Cap
1984-1996 Half Shaft with Automatic or Manual Transmission
1980-1982 Half Shaft with Manual Transmission
1963-1979 Half Shaft with Automatic or Manual Transmission
…
Non-Greasable, Cap is 1.125" and 3.625" Across
1980-1981 Half Shaft with Automatic Transmission
1980-1981 Drive Shaft with Manual Transmission (Use on Slip Yoke)
1975-1979 Drive Shaft with Automatic or Manual…