Your shopping cart is empty!
BUILD YOUR PASSION
-
My Account Sign In / Register
×
Select Your Vehicle to Shop for the Correct Parts:
Show More Filters
OER® was established in the early 1980's to manufacture original equipment reproductions where every part is meticulously reproduced to exact factory specifications. All OER® parts are reverse engineered or manufactured using original blueprints when available to ensure the closest possible reproduction available on the market. When available, original factory tooling is utilized to insure complete originality. Our mission is to supply the highest quality parts available for the enthusiast and serious restorer. Whether you're a serious restorer, or just someone who wants a replacement part for your classic vehicle, OER® is the source for the finest quality parts on the market. Today, OER® is the most recognized brand in automotive restoration parts. Choose OER® for all your restoration needs.
Many OER® products are officially licensed by General Motors and the Chrysler Group ensuring the quality and authenticity of these products. The GM Restoration Parts logo and the MOPAR Authentic Restoration Product logo are the true signs of quality. OER® is licensed by GM and the Chrysler Group as an official restoration parts manufacturer.
1-36 of 1233 results for OER : All Productsgo
Sort by
Show
Show results for
Refine By
Availability
On Sale
Condition
Price
Under $10 (110)$10 to $25 (169)$25 to $50 (290)$50 to $100 (171)$100 to $250 (225)$250 to $500 (125)$500 & Above (143)
$ to $ go
Manufacturer
Show Less Filters
Model: 3446657
Condition: NEW
This hose bracket set is designed to secure a pair of heater hoses to the inner fender skirt and the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance.
These heater hose…
Model: 3097523
Condition: NEW
OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
Model: 3443918
Condition: NEW
Reproduction of the original GM turn signal switch cancelling cam/horn contact for tilt and non-tilt steering wheels. Reproduced to original factory specifications. Each cancelling cam/horn contact is designed to replace the original Delco…
Model: 2029813
Condition: NEW
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will keep your…
Model: 3445214
Condition: NEW
This tool is great for tucking headliner or upholstery material into tedious channels without damaging the material. Headliner installation is almost never easy, but having the right tools can make it much easier. This tool helps you to…
Model: 2036688
Condition: NEW
OER reproduction of the original windshield washer jar designed for use on various 1970-1984 GM car and truck models. Manufactured to OE specifications, this washer jar replicates the original in appearance and design, and installs using…
Model: 3097520
Condition: NEW
OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
Model: 1009628
Condition: NEW
OER® reproduction of the original hazard flasher switch knob designed for use on various GM models. Each knob is an exact replica of the original switch knob manufactured in injection molded ABS to exact specifications. Includes HAZARD…
Model: 2035049
Condition: NEW
This OER® reproduction mounting plate glues to the windshield, and the rear view mirror attaches to this mounting plate.
Applications:
1973-74 Buick Apollo
1973-86 Buick Regal
1975-79 Buick Skylark
1970-8 6 Chevrolet…
Model: 3444704
Condition: NEW
OER reproduction turn signal cancel cam to fit a wide variety of GM vehicles equipped with tilt wheel. Features the OEM factory original design which included a serviceable horn contact plunger and spring, unlike other products in the…
Model: 3444278
Condition: NEW
OER® Reproduction of the original stamped steel headlamp retaining ring designed for use with various various 1941-74 GM car and truck models. Each headlight retaining ring is designed to hold the sealed beam into the mounting bucket…
Model: 2032607
Condition: NEW
High quality reproduction of the original hazard flasher knob designed for use on various GM models. This authentic replacement is manufactured in zinc die-cast material than chrome plated to a lusterous shine. Features the letters…
Model: 3442036
Condition: NEW
These OER® reproduction stamped metal clips attach to the glove box liner in various classic GM passenger cars and trucks. These clips allow the liner to be attached in place with mounting screws (sold separately).
For glove box…
Model: 3959795
Condition: NEW
Reproduction factory ball stud pivot for various GM models. 1/4"-20 x 1-1/2". Accelerator pedal ball studs can break after many years of use and will need to be replaced. Check your stud for wear when replacing the gas pedal linkage…
Model: 3448158
Condition: NEW
OER's Paint Adhesion Promoter is a clear adhesive promoter that is completely flexible, fast dry and easy to use. Will adhere to most plastic surfaces and metal. Highly recommended for use on, metal, TPO, PP and interior and exterior…
Model: 3443048
Condition: NEW
OER® reproduction rubber bumper for the various GM applications listed below.
Camaro Applications
1967 Radiator fan guard bumper 6 Cyl. (2)
1968 Rally Sport headlamp cover bumper
1969 Rear license bumper
Firebird…
Model: 3444814
Condition: NEW
Reproduction of the original upper radiateo hose designed for use on various 1970-79 Camaro, Corvette, and 1977-79 Firebird models with Chevrolet small block engines. This radiator hose is precision molded from premium grade rubber to…
Model: 3448223
Condition: NEW
Formulated to enhance and restore faded, worn or stained surfaces, our OER® Carpet Dye molecularly bonds to carpeting and dries in minutes for a finished result that will not wear off. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.) A…
OER 1962-76 Chevrolet, Buick, Oldsmobile, Rocker Molding Clip Set, with Screws, 24 Piece Set *R13956
Model: 3087132
Condition: NEW
This 1" tall rocker panel molding retainer replaces the original rail style retainers. Install this clip at every rail mounting hole instead of the rail. This style clip helps prevent water build up between the rail and rocker panel and…
Model: 3443038
Condition: NEW
OER® reproduction of the original die-cut seal that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage.
Applications
1967-69 Camaro
1963-67 Chevrole t/GMC…
Model: 1008686
Condition: NEW
OER® reproduction of the original flywheel pan (also called a torque converter cover) for use with various 1962-73 Chevrolet models. Each flywheel pan cover, aka the torque drive convertor cover is manufactured to OE specifications in…
Model: 3442900
Condition: NEW
Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut 1986-90 Century…
Model: 2037346
Condition: NEW
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER® reproduction power…
Model: 3449467
Condition: NEW
Reproduction fuel tank for 1969-70 Chevrolet Corvette models without EEC bracket on side. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Comes…
Model: 3442365
Condition: NEW
Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter in order to use…
Model: 3442091
Condition: NEW
Correct replacement lug nut cap designed for use with various GM factory aluminum wheels including the GTA, and Hi-Tech factory alloy wheels. 20 required. Cap is designed to screw onto the factory style lug nut that features external…
Model: 3446332
Condition: NEW
OER® reproduction of the original style stamped metal clip that attaches to the glove box liner in various classic GM passenger cars and trucks. These clips allow the liner to be aligned and attached in place with mounting screws. Sold…
Model: 3445145
Condition: NEW
OER® Authorized quality reproduction wheel trim ring. OER® now offers Rally wheel trim rings at a greatly reduced price. Get a stylish look with this reproduction trim ring. Also sold as a set of 4. See part # 545910. Fits 14" x 6" or…
Model: 3444997
Condition: NEW
Reproduction of the original retaining screw designed for use with a variety of different vehicles and fitments. Screw used to attach the headlamp retaining ring (secure the bulb) to the headlamp bucket on GM vehicles with 7" single…
Model: 3452852
Condition: NEW
Flaunt your Chevrolet pride with this OER® custom license plate frame that shows off your vehicle year and model.
Produced in die-cast zinc with an elegant, rust-preventive triple chrome plating with top mounting holes.
Made in…
Model: 3448893
Condition: NEW
Quality reproduction of the original dome light lens designed for use with various 1958-68 Full Size Chevrolets, 1963-67 and 1969-73 Chevrolet Corvette models, as well as various other GM models as listed below. This rectangular style lens…
Model: 3448222
Condition: NEW
OER's® revolutionary formula provides 40% more coverage than standard dyes and lacquers, and actually penetrates and molecularly bonds to the surface to permanently seal in the color. Dries to the touch in 45 seconds, forms a complete…
Model: 3446903
Condition: NEW
OER® Classic Blend Engine Paint is produced to match factory paint color as closely as possible and offers excellent paint coverage and adhesion even on difficult to paint surfaces. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). This…
Model: 5005144
Condition: NEW
Reproduction "Fuel Injection' emblem/name plate in script for 1958-61 Chevrolet Corvette models with fuel injection. It has 3 mounting pins on the back. Can also be a universal for any application that has fuel injection. Sold…
Model: 4841451
Condition: NEW
Reproduction power window and door lock switch assembly for the passenger side on 1997-2004 C5 Corvette models. Produced in injection molded plastic, each assembly includes the door lock switch, power window switch, and integral bezel with…
Model: 4841436
Condition: NEW
Direct replacement HVAC AC and heater blend door actuator for a wide range of GM vehicles. Fits and functions like original equipment to control air flow and temperature inside the vehicle. Features a durable plastic housing with motor and…