877-600-8388 Contact Us Mon-Fri 8a-9p & Sat 10a-3p EST
BUILD YOUR PASSION

Hooker 1955-1982 Chevrolet Corvette Super Competition Long Tube Header 2456-1HKR

Hooker 1955-1982 Chevrolet Corvette Super Competition Long Tube Header 2456-1HKR
$916.99 ea
NEWARRIVING SOONEstimated Ship Date 07/12/2022 (If Ordered Today)8 available from HOLLEY PERFORMANCE PRODUCTS as of 06/27/2022
Model: 4008896
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
OVERSIZE 1
STORE PICKUP
[More Info]
With Hooker Super Competition the objective has always been to make the maximum horsepower and to put it at the optimum point in the power curve. It takes a lot of time and money to do the job right. We will sometimes spend up to 2 to 3 times more just to make the Super Competition header work only 5 to 10 percent better. That commitment to excellence has made Hooker Headers the winningest header manufacturer in automotice drag racing history.
Features:
  • Tuned Length Tubes For Max Exhaust Scavenging/Velocity
  • Designed For Optimal Performance
  • Long Transition Collector For Decreased Back Pressure
  • Mandrel Bent Tubing For Smooth Exhaust Flow
  • Machined Flange Provides Finest Fit
  • Best Weld For Durability
  • All Hardware Included
Holley Performance Emission Code 4: This part is legal for sale or use on Racing Use Only Vehicles. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle
Installation Notes:
Will not fit with angle plug heads or raised port heads. Installation requires air conditioning bracket 10925HKR left side or 10926HKR right side. On 1979 and later vehicles with short compressors, use stock bracket. Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Please call Hooker tech service at 270-781-9741 for additional information regarding ceramic coated exhaust products. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Hooker does not recommend the use of header wraps as this will void the warranty.
About Hooker

The Hooker line of Super Competition and Competition headers, mufflers and catback exhaust systems are the most complete on the market.

Downloads:

Download Name File Size
Warranty_Policy.pdf14.65KB
2456-1HKR.pdf155.16KB
2456hkrrev2.pdf347.67KB

Vehicle Fitment:

The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Engine Fitment Notes
Chevrolet Corvette 1955 4.3L / 265 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1956 4.3L / 265 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1957 4.6L / 283 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1958 4.6L / 283 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1959 4.6L / 283 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1960 4.6L / 283 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1961 4.6L / 283 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1962 5.3L / 327 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1963 5.3L / 327 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1964 5.3L / 327 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1965 6.5L / 396 / V8
5.3L / 327 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1966 5.3L / 327 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1967 5.3L / 327 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1968 5.3L / 327 / V8
5.4L / 327 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1969 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1970 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1971 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1972 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1973 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty
Chevrolet Corvette 1974 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1975 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1976 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1977 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1978 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1979 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1980 5.0L / 305 / V8
5.7L / 350 / V8
Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1981 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads
Chevrolet Corvette 1982 5.7L / 350 / V8 Metallic Ceramic Coating; Tube Size 1.625 in. x 24 in.; Collector Size 3 in./Length 8 in.; Port Shape Same As Port;Intended For Race Use Only
Breaking In An Engine w/Ceramic Coated Headers Will Damage Coating~Breaking In An Engine w/Ceramic Coated Headers Will Void All Warranties~Header Wraps Can Cause Header Tube Cracks/Rust From Excessive Heat/Moisture~Hooker Does Not Recommend The Use Of Header Wraps/Will Void The Warranty~Will Not Fit With Angle Plug Or Raised Port Heads

Specifications:

Application Automotive
Coated Finish Metallic Ceramic
Collector Tube Size 3.000 in.
Emission Code 4
Engine Chevrolet Small Block Gen I
Engine Make/Size Chevy Small Block
Header Finish Silver Ceramic
Header Style Long Tube
Material Mild Steel
Part Type Exhaust Header
Port Shape Same As Port/Can Be Matched
Primary Tube Dia. 1-5/8 inch
Tube Diameter 1.625 in.
Tube Direction Down Swept
WARNING CA Proposition 65 WARNING: Cancer and Reproductive Harm

Reviews:

Write a Review
* Your Name:
* Email (This will not be displayed)
* Rating:
Comments:

Ask a question about

Hooker 1955-1982 Chevrolet Corvette Super Competition Long Tube Header 2456-1HKR:
* Your Name:
* Email (This will not be displayed)
Question:
Corvette Depot 2022