The product you were looking for no longer exists! Here are products you may be interested in from the same category.
Mounting Bracket For Chevrolet Camaro 1967 Chevrolet Camaro 1968 Chevrolet Camaro 1969 Chevrolet Chevelle 1964 Chevrolet Chevelle 1965 Chevrolet Chevelle 1966 Chevrolet Chevelle 1967 Chevrolet Chevelle 1968 Chevrolet Chevelle 1969…
driver or passenger side, (includes pigtail)…
driver or passenger side, (includes pigtail)…
all Note: Requires use of VHX5862 to complete wiring to headlights…
all with one or more of the following options: power windows, power door locks, courtesy light delay, or intermittent/pulse wipers…
all without air conditioning…
Dash Harness to courtesy light, all (includes pre-assembled light socket, wiring, & connector)…
all (includes pair of pre-assembled light sockets, tubing, wiring, & correct molded connectors) Note: Designed to replace only the light sockets and wiring. Original front parking/turn signal light assembly was comprised of a bezel/housing…
all without backup lights…
all 2nd design: courtesy lamp timer located to the right of glove box…
all automatic transmission…
all automatic transmission without seat belt interlock system…
all without air conditioning…
all without air conditioning…
with H.E.I. coil on distributor This harness will allow you to easily replace your mechanical cable driven tachometer with a 1975-77 electric tachometer without cutting or splicing any wiring. Does not include tachometer or tachometer…
Our Original Design Series™ wiring harnesses are manufactured exactly as the wiring was made when your vehicle left the factory. These harnesses are made to the exact O.E.M. (original equipment manufacturer) specifications, using the…
all automatic transmission…
all with none of the following options: power windows, power door locks, courtesy light delay, or intermittent/pulse wipers…
all 1st design: courtesy lamp timer located to the left of steering column…
all 2nd design: VIN ending in 27373 to 49213, alarm switch located in driver side door lock cylinder & alarm horn located behind driver side front fender, near firewall…
all with air conditioning…
all with air conditioning…
all without air conditioning…
all with air conditioning…
all without air conditioning, 1st design: harness routes through mounting brackets affixed to lower-backside of speedometer and tachometer…
all with air conditioning…
all without backup lights…
all Note: Requires use of VHX5862 to complete wiring to headlights…
with cannister type coil This harness will allow you to easily replace your mechanical cable driven tachometer with a 1975-77 electric tachometer without cutting or splicing any wiring. Does not include tachometer or tachometer filter…