Billet Aluminum Rotor Mounting Hats and Pre-Assembled Full-Floating Hardware
Braided Stainless Steel Brake Lines Improve Pedal Feel & Will Never Corrode
Choose From Red Or Black Powder Coated Calipers
Includes Rotors, Calipers, Hats, Lines, Pads, Brackets, Hardware, & Instructions
Fits 1997-2013 Corvettes with 19" Minimum Diameter Wheels
Made In The USA
These AERO6 calipers from Wilwood were designed for the specific purpose of providing big capacity braking with large diameter rotors for the Corvette. They provide pick up where the factory brakes left off by providing big brake performance for show and dual purpose street and track vehicles. This kit is fully compatible with OE master cylinder output and ABS function. Directional staggered vane 15" rotors provide maximum cooling for sustained high heat durability.
NOTE:Bedding-in new pads and rotors should be done carefully and slowly. Rapid heat build up in the brake system can lead to warped rotors and or glazed brake pads. Most brake pad compounds will take up to 300-400 miles to fully develop an even transfer film on the rotors. After installing new pads make 6 to 10 stops from approximately 35 mph with moderate pressure. Make an additional two to three hard stops from approximately 40 to 45 mph. Do not allow the vehicle to come to a complete stop.When completed with this process, park the vehicle and allow the brakes to cool completely before driving on them again. Do not engage the parking brake until after this cooling process is compete.
Vehicle Fitment:
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
